Alliance Commercial Direct Heating Engery Pro Heat Pump

Product Description
The Alliance Direct Heating Heat Pump range provides an economical hot water solution for commercial and residential applications such as hotels, guesthouses, and factories. Using advanced variable flow rate control and a pressure-activated valve, it maintains a constant water temperature year-round. With an outlet temperature of up to 65°C, it efficiently delivers stored hot water at 60°C.- Famous brand high efficiency scroll compressor – Copeland
- High efficiency eco-friendly R417A refrigerant which does
not pollute the ozone layer - Adjustable water temperature setting: 250ºC – 60ºC
- Extremely energy efficient with COP’s up to 4.6
- Patented high efficiency Tube-in- Shell water heat exchanger
- Electronic expansion valve (EEV) for reliability and high precision
- Wi-Fi ready
- Touch screen wired controller
- Automatic defrost function
- Advanced system protectio
Please take note of the important information regarding the costs of the installation carefully and ensure you are aware of the costs not included. It is your responsibility to carefully read and understand these Terms and Conditions. Failure to do so does not absolve you of your obligations or limit our rights under this agreement:
The cost of the back-to-back aircon installation (i.e. indoor unit located on the other side of the wall opposite the outdoor unit) with available plug point for the 9000btu and 12000btu is R2500.00 (incl. VAT). The cost of the installation for the 18000btu and 24000btu is R2700.00 (incl. VAT)
The cost of this installation includes the following:
- Up to 3metres of refrigerant piping, drain pipe and cable
- Outdoor mounting bracket (if required)
- Installation to a maximum height of 3metres above ground level
- Drilling of one hole for piping
- Holes will be filled but not painted
The installer will quote for all costs in addition to the 3metre back-to-back installation which will include but are not limited to the following:
- Any required piping and cabling in addition to the piping and cabling referred to above, or electrical connection to the main switchboard
- Travelling expenses in the event of the installation being out of a 30km radius from where the unit was bought
- Any other extras, including but not limited to:
- external isolators and additional electrical work required
- any additional refrigerant piping, insulation, drain pipe and cable
- trunking to cover piping
Please note costs of isolators are not included in the installation fee. Isolator switches are a regulation requirement and are not included in the cost of the installation. A qualified electrician must install an isolator at your own cost. He must install the isolator not more than 2metres from the condenser and within view of the condenser. The cost of this is in addition to the installation cost of the unit and must be paid directly to the electrician. Indoor and outdoor units must always be earthed. You can expect to pay anything between R1000-R1500 in addition to your basic installation fee for this. This regulation is governed by the South African National Standards (SANS) 10142-1.
Alliance Africa shall not be held liable for any consequences arising from your failure to read, understand, or comply with these Terms and Conditions.

